As an Amazon Associate I earn from qualifying purchases.
BOSS Audio Systems #ad - Variable low-pass crossover - subwoofers reproduce sound based on a number of different low-range frequencies. Switchable bass boost - bass boost allows you to adjust the low bass within the boost range to just the way you like it.
Both essentially carry signal from your receiver to your amplifier to your speakers. Mosfet power supply - a mosfet is an electrical switch that allows the flow of electrical current. Power - 1100 max x 1 @ 2 ohms, 550 max x 1 @ 4 Ohms.
We strongly encourage professional installation of this product to ensure proper functionality. Class a/b topology - class ‘a’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Specs - dimensions: 9. 13” x 1044” x 2. 25”, thd @ rms output: 001%, frequency response: 9 hz to 50 khz, speaker impedance: 2 to 8 Ohm, Weight: 4.
Planet Audio #ad - Most aftermarket radios have multiple pairs of rca outputs that can connect to multiple amplifiers. This input will be used to connect the ac15001m to your factory radio or aftermarket radio that does not have low-level rca inputs.
Power: max power output of 1500 watts at 2 ohms into one channel. Maximum power output of 750 watts at 4 ohms into one channel. Low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting.
Variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it. Low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac15001m with the source unit. This amplifier is designed to run your subwoofers giving them the power that they need to perform as they were meant to.
Sound Storm Laboratories #ad - Built-in amplifier: with a mosfet power supply you get improved switching speeds, lower gate-to-drain feedback capacitance, better performance with less power from the driver, lower thermal impedance for higher switching frequencies. Sound storm provides a powerful 3-year Platinum online dealer so long as the purchase is made through.
75” x 3”. Variable bass boost: variable bass boost allows you to adjust the low bass within the boost Range to just the way you like it. If you are short on space, This is a great solution for you.
Dimensions: 15” x 9. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. We strongly encourage Professional installation of this product to ensure proper and safe functionality. High level inputs: speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the lopRO10 to your factory radio or an aftermarket radio that does not have low-level RCA inputs.
BOSS Audio Systems #ad - We strongly encourage professional installation of this product to ensure proper functionality. A high level +/- wire input is measured in wattages. Low & high level inputs - a low level rca input is measured in voltages. Class a/b topology - class ‘a’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal.
Warranty - boss audio systems provides a 6 year Platinum Online Dealer Warranty for purchases through Amazon. Com.
Variable input gain control - the gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier. Both essentially carry signal from your receiver to your amplifier to your speakers. Power - 400 max x 2 @ 2 ohms, 200 max x 2 @ 4 ohms, 800 Max Bridged x 1 @ 4 Ohms. Class ‘b’ amplifiers have no current flowing through its outputs with no audio signal. Specs - dimensions: 10
Skar Audio #ad - Frequency response: 20hz - 250hz, On-board Bass Boost Control 0-9dB. Competition grade class D MOSFET Power Amplifier. Stable at 1 ohm | Remote Subwoofer Level Control Included.
BOSS Audio Systems #ad - Wiring installation kit continued: 10 5/16" and 1/4" ring terminals, 3 rubber Grommets, 6 ft. Class ‘b’ amplifiers have no current flowing through its outputs with no audio signal. Variable low-pass crossover: subwoofers reproduce sound based on a number of different low-range frequencies.
Class a/b topology: class ‘a’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal.
It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry. You can set exact sound specifications for the bass frequency reproduction. Speaker wire, 16 ft. 5” x 2. 18 ga blue turn-on wire, 3 ft. Specs: the ar1500m amplifier is 10
BOSS Audio Systems #ad - High level inputs: speaker level inputs are commonly referred to as high-level inputs. Variable input gain control: the variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.
Power: maximum power output of 200 watts at 2 Ohms into two channels. Low level inputs: line level inputs, also known as rca inputs or low-level inputs, use RCA interconnect cables to link the R1002 with the source unit.
Speaker level inputs will be used to connect the R1002 to your factory radio or an aftermarket radio that does not have low-level RCA inputs. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
Skar Audio #ad - Advanced air flow cooling Design | Fs: 35. 8 hz. Massive double stack magnet & High Temperature 2. 5" copper Voice Coil. Competition grade paper Cone Stitched to High Roll Foam Surround.
JBL #ad - Slipstream port eliminates port noise and provides distortion-free bass at high output levels. 35 - 120hz frequency response. Powered polypropylene subwoofer with built-in amplifier that matches the woofer performance at 150W RMS or 450W Peak.
Scosche #ad - Buy with confidence - backed by Scosche’s Lifetime Tech Support and Limited Lifetime Warranty. This speaker wire line out converter is compatible with high power car stereos up to 90 watts per channel. Each converter includes easy to follow instructions to simplify the installation process.
The rca line output converter for subwoofer makes it easy to hook up to an amplifier and set up a subwoofer system in any car. No need to remove the car stereo. Independent left and right channel level adjustments provide the perfect sound balance.
External controller - includes mountable remote control knob for adjusting subwoofer bass audio level from the dash. No reason to pull over and manually adjust the amplifier. Speaker to rca converter - converts car stereo output speaker wire to RCA connectors. Subwoofer - this diy speaker kit is a convenient speaker wire to subwoofer adapter. Delivering premium performance without noise, static, or buzzing.
1. BOSS Audio Systems
#ad1100 High Output, Monoblock, Low Pass Crossover, Low/High Level Inputs, Class A/B, Stereo, 2/4 Ohm Stable, Mosfet Power Supply, BOSS Audio Systems R1100M Riot Series Car Audio Subwoofer Amplifier
#adBoth essentially carry signal from your receiver to your amplifier to your speakers. Mosfet power supply - a mosfet is an electrical switch that allows the flow of electrical current. Power - 1100 max x 1 @ 2 ohms, 550 max x 1 @ 4 Ohms.
More information #ad
It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry. Low & high level inputs - a low level rca input is measured in voltages. We strongly encourage professional installation of this product to ensure proper functionality. Class a/b topology - class ‘a’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Specs - dimensions: 9. 13” x 1044” x 2. 25”, thd @ rms output: 001%, frequency response: 9 hz to 50 khz, speaker impedance: 2 to 8 Ohm, Weight: 4.
| Brand | BOSS Audio Systems #ad |
| Manufacturer | BOSS AUDIO #ad |
| Height | 2.25 Inches |
| Length | 9.13 Inches |
| Weight | 4.4 Pounds |
| Width | 10.44 Inches |
| Part Number | R1100M |
| Model | R1100M |
| Warranty | 6 Year Platinum Online Dealer Warranty valid only on products Sold / Shipped by Amazon.com. This offer is not valid on purchases made from third party market place sellers |
More information #ad
2. Planet Audio
#ad1500 Watts Max Power, Remote Subwoofer Control, Class A/B, Mosfet Power Supply, 2/4 Ohm Stable, Planet Audio AC1500.1M Monoblock Car Amplifier
#adPower: max power output of 1500 watts at 2 ohms into one channel. Maximum power output of 750 watts at 4 ohms into one channel. Low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting.
More information #ad
A low-pass filter will primarily keep high notes out of your subwoofers. High level inputs: speaker level inputs are commonly referred to as high-level inputs. Variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it. Low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac15001m with the source unit. This amplifier is designed to run your subwoofers giving them the power that they need to perform as they were meant to.
| Brand | Planet Audio #ad |
| Manufacturer | Planet Audio #ad |
| Height | 2.4 Inches |
| Length | 10 Inches |
| Weight | 6.69 Pounds |
| Width | 10 Inches |
| Part Number | AC1500.1M |
| Model | AC1500.1M |
More information #ad
3. Sound Storm Laboratories
#adGreat For Vehicles Needing Bass But Have Limited Space, Black, Remote Subwoofer Control, 10 Inch Subwoofer, Sound Storm Laboratories LOPRO10 Amplified Car Subwoofer, 1200 Watts Max Power, Low Profile
#ad75” x 3”. Variable bass boost: variable bass boost allows you to adjust the low bass within the boost Range to just the way you like it. If you are short on space, This is a great solution for you.
More information #ad
Variable low-pass filter - a low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers. You will use the Low-pass filter to primarily keep high notes out of your subwoofers. Dimensions: 15” x 9. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. We strongly encourage Professional installation of this product to ensure proper and safe functionality. High level inputs: speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the lopRO10 to your factory radio or an aftermarket radio that does not have low-level RCA inputs.
| Brand | Sound Storm Laboratories #ad |
| Manufacturer | Sound Storm Laboratories #ad |
| Height | 3 Inches |
| Length | 9.75 Inches |
| Weight | 13 Pounds |
| Width | 15 Inches |
| Part Number | LOPRO10 |
| Model | LOPRO10 |
| Warranty | 3 Year Platinum Online Dealer Warranty |
More information #ad
4. BOSS Audio Systems
#ad2 Channel, BOSS Audio Systems R4002 Riot Series Car Audio Stereo Amplifier – 800 High Output, Subwoofer, Bridgeable, 2/4 Ohm, Class A/B, Low/High Level Inputs, Full Range, High/Low Pass Crossover
#adWarranty - boss audio systems provides a 6 year Platinum Online Dealer Warranty for purchases through Amazon. Com.
More information #ad
Mosfet power supply - a mosfet is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry. Variable input gain control - the gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier. Both essentially carry signal from your receiver to your amplifier to your speakers. Power - 400 max x 2 @ 2 ohms, 200 max x 2 @ 4 ohms, 800 Max Bridged x 1 @ 4 Ohms. Class ‘b’ amplifiers have no current flowing through its outputs with no audio signal. Specs - dimensions: 10
| Brand | BOSS Audio Systems #ad |
| Manufacturer | BOSS AUDIO #ad |
| Height | 2.25 Inches |
| Length | 10.72 Inches |
| Weight | 5.53 Pounds |
| Width | 10.44 Inches |
| Part Number | R4002 |
| Model | R4002 |
| Warranty | 6 Year Platinum Online Dealer Warranty valid only on products Sold / Shipped by Amazon.com. This offer is not valid on purchases made from third party market place sellers |
More information #ad
5. Skar Audio
#ad3500W, Skar Audio RP-3500.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control
#adMore information #ad
Featuring 4-way protection circuitry and 1/0 AWG Power & Ground Input Terminals for Maximum Current Flow. Peak power at 1 ohm: 5, 400 watts | rms power at 1 Ohm: 3, 500 Watts.| Brand | Skar Audio #ad |
| Manufacturer | Skar Audio #ad |
| Height | 2.45 Inches |
| Length | 18.9 Inches |
| Width | 8.27 Inches |
| Part Number | 43217-166412 |
| Model | RP-3500.1D |
| Warranty | 2 Year Limited Warranty |
More information #ad
6. BOSS Audio Systems
#ad1500 Watts Max Power, Class AB, Mosfet Power Supply, 2/4 Ohm Stable, Monoblock, Remote Subwoofer Control, BOSS Audio Systems AR1500MK Car Amplifier and 8 Gauge Wiring Kit
#adClass a/b topology: class ‘a’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal.
More information #ad
Switchable bass boost: bass Boost allows you to adjust the low bass within the boost Range to just the way you like it. 6”, 7. Split loom tubing, 20 4" Wire Ties, 20 ft. We strongly encourage professional Installation of this product to ensure proper and safe functionality. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry. You can set exact sound specifications for the bass frequency reproduction. Speaker wire, 16 ft. 5” x 2. 18 ga blue turn-on wire, 3 ft. Specs: the ar1500m amplifier is 10
| Brand | BOSS Audio Systems #ad |
| Manufacturer | BOSS AUDIO #ad |
| Height | 2.56 Inches |
| Length | 10.31 Inches |
| Weight | 7.5 Pounds |
| Width | 6.5 Inches |
| Part Number | AR1500MK |
| Model | AR1500MK |
| Warranty | BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com. We strongly encourage professional installation of this product to ensure proper and safe functionality |
More information #ad
7. BOSS Audio Systems
#adBOSS Audio Systems R1002 Car Amplifier, 2 Channel, 200 Watts Max Power, 2 4 Ohm Stable, Class AB, Full Range
#adPower: maximum power output of 200 watts at 2 Ohms into two channels. Low level inputs: line level inputs, also known as rca inputs or low-level inputs, use RCA interconnect cables to link the R1002 with the source unit.
More information #ad
Maximum power output of 100 Watts at 4 Ohms into two channels. Warranty: boss audio systems provides a powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon Dot Com. Speaker level inputs will be used to connect the R1002 to your factory radio or an aftermarket radio that does not have low-level RCA inputs. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
| Brand | BOSS Audio Systems #ad |
| Manufacturer | BOSS AUDIO #ad |
| Height | 2 Inches |
| Length | 5.3 Inches |
| Weight | 2.2 Pounds |
| Width | 9 Inches |
| Part Number | R1002 |
| Model | R1002 |
| Warranty | 6 Year Platinum Online Dealer Warranty valid only on products Sold / Shipped by Amazon.com. This offer is not valid on purchases made from third party market place sellers |
More information #ad
8. Skar Audio
#adSkar Audio DDX-10 D2 10" 1500 Watt Max Power Dual 2 Ohm Car Subwoofer
#adMore information #ad
Frequency response range: 28 hz - 300 Hz | Sensitivity SPL: 85. 2 dB. 10-inch dual 2 ohm Competition Grade Car Subwoofer. Peak power: 1, 500 watts | rms power: 1, 000 Watts.| Brand | Skar Audio #ad |
| Manufacturer | Skar Audio #ad |
| Height | 11 Inches |
| Length | 14 Inches |
| Weight | 32.75 Pounds |
| Width | 14 Inches |
| Part Number | DDX-10 D2 |
| Model | DDX-10 D2 |
| Warranty | 2 year limited warranty |
More information #ad
9. JBL
#adJBL SUBBP12AM, 12” amplified 12” Subwoofer with Sub Level Control
#adMore information #ad
Included components: one suBBP12AM powered Subwoofer/enclosure, owner's manual and remote control. 12" 305mm woofer. Polypropylene Woofer Cone.| Brand | JBL #ad |
| Manufacturer | JBL #ad |
| Height | 1.8 Inches |
| Length | 14.84 Inches |
| Weight | 36.6 Pounds |
| Width | 25.35 Inches |
| Part Number | SUBBP12AM |
| Model | SUBBP12AM |
| Warranty | 1 year manufacturer |
More information #ad
10. Scosche
#adScosche LOC2SL Line Output Converter Adjustable Amplifier Add On Module for Car Stereo, Black, 2-Channel Signal Sensing Speaker Wire to RCA Adapter with Remote Control Knob
#adThe rca line output converter for subwoofer makes it easy to hook up to an amplifier and set up a subwoofer system in any car. No need to remove the car stereo. Independent left and right channel level adjustments provide the perfect sound balance.
More information #ad
This remote bass knob lets you control the level of sound with convenience. Simply tap into the car audio speaker wire with snap adapters. Includes signal sensing 12V remote turn-on output. External controller - includes mountable remote control knob for adjusting subwoofer bass audio level from the dash. No reason to pull over and manually adjust the amplifier. Speaker to rca converter - converts car stereo output speaker wire to RCA connectors. Subwoofer - this diy speaker kit is a convenient speaker wire to subwoofer adapter. Delivering premium performance without noise, static, or buzzing.
| Brand | Scosche #ad |
| Manufacturer | Scosche #ad |
| Height | 13.25 Inches |
| Length | 2.13 Inches |
| Weight | 0.4 Pounds |
| Width | 6.63 Inches |
| Part Number | LOC2SL |
| Model | LOC2SL |
| Warranty | Lifetime Limited Warranty |
More information #ad
